How to install the tub shower door?
Home » News » Industry News » How to install the tub shower door?

How to install the tub shower door?

Views: 0     Author: Site Editor     Publish Time: 2021-09-28      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

The modern home requires more and more sanitary facilities, many families want to have an independent bath space. The tub shower door makes full use of the corner of the bathroom and divides the shower area to form a relatively independent bath space. How to install the tub shower door?


HX421-A-640-640

Select High-Quality Glass

Make sure the tub is well rounded

Position tub shower door

Install the top limit slot of the frame.

Install metal finish wood base.

Glass installation

Glue sealing


Select High-Quality Glass

Himalaya company conducts many tests on tub shower doors, and the quality qualification rate is guaranteed.


Make sure the tub is well rounded

When installing the tub shower door, we should first ensure that the ground is flat, and the spacing between each joint of the glass door should not be too large. It is especially important to note that all kinds of auxiliary materials must conform to the design requirements and relevant quality regulations. Otherwise, safety accidents are easy to occur. After installation should also pay attention to clean up the installation site to avoid the use of safety risks.


Position tub shower door

The fixed glass partition and movable tub shower door fan must be positioned uniformly, the partition and the positioning line of the tub shower door should be released according to the requirements of the design drawing, the position of the door frame should be determined, and the elevation of the ground and the top of the door frame should be accurately measured.


Install the top limit slot of the frame.

The width of the top limit slot of the mounting door shall be greater than the glass thickness of 2~4 mm, and the groove depth shall be between 20 and 30 mm for glue injection. The installation method can lead out two metals.

Use plywood to determine the shape and position of the tub shower door frame column (note that the decorative surface size should be reduced). Finally, the metal decorative surface should be wrapped in the middle of the two sides of the glass. The seam position must be accurate and vertical.Decorative plate edges from the centerline, and then install the top limit slot of the tub shower door frame according to the sideline.


Install metal finish wood base.

The installation method can nail the square wood on the original embedded wood brick or fasten the square wood to the ground through the expansion bolt, and then stick the metal decoration panel to the wooden square with universal glue. Aluminum alloy square tube can be fixed on the frame column with aluminum angle or fixed with wood screws on the wood brick buried in the ground.


Glass installation

Hold the thick glass tightly with a glass sucker (or glass sucker), then hold the sucker to lift the thick glass plate through 2~3 people and stand up and move to the installation site for the position. Position method: the upper part of the glass of the tub shower door should be inserted into the limit slot at the top of the door frame, then the lower part of the glass of the tub shower door should be placed on the centerline, and the installation position of the two sides of the door frame should be arranged.


Glue sealing

The glass glue is injected into the gap on both sides of the top root slot and the two sides of the bottom glass slot of the tub shower door and the joint between the thick glass and the door frame column. The injection order should start from the end of a gap to the end of the end, with no pause. The main point of operation is to hold the pressure handle of the seam gun evenly, and at the same time, the speed of moving along the gap should be uniform, that is, with the extrusion of glass glue, the glue injection mouth should be moved uniformly so that the glass glue can form a uniform straight line at the gap. Finally, scrape off the excess glass glue with a plastic sheet and wipe off the glue with a clean cloth.


The above is the installation method of tub shower doors, Himalaya company conducts many tests on the tub shower door, and the quality qualification rate is guaranteed. If you need a tub shower door, you can consider our cost-effective products. Himalaya company's materials are non-toxic and tasteless, aging-resistant, perfect after-sales service, you can have no worries.

 


Contact Himalaya For Shower Products
LOGObottom

Tel : +86-760-89921987  

Fax : +86-760-88483779

No.1,Yingfuyi Road, Gangkou Town, Zhongshan, Guangdong, 528447 
​Copyright  2021 Zhongshan Himalaya Bathrooms Co.,ltd.  Support by Leadong