The shower door's main material is tempered glass, it's generally divided into sliding door, folding door, swing door and hinged door. How to remove the shower doors? Here is a detailed introduction.
If it is a sliding door, remove the door from the slide by lifting the door from the slide and then tilting it up. If it is a suspended slide, some need to unload the slide and door together.
If it is a flat door, will fold the screw-down, the door, and fold together to unload, unless that kind of high-grade quick folding, can quickly separate the two foldings. Install the expanded rubber particles in the hole and use the hand hammer to knock the rubber particles into the hole.
If it is a folding door, remove the slider in the upper slide of the folding door with a screwdriver, and the door will leave the slide.
Method of removing shower doors
The shower door in the bathroom is easy to remove, just ask your family or friends for help. The shower door structure includes a glass door, upper shaft, fixed glass upper screw, called upper shaft adjustment screw. There is also a fixed shower door to adjust the rotating shower door, which generally uses a spring, which is the main core of the shower door rotation, and the glass door is almost removed. Tighten the top of the shower door before removing the spring. After unscrewing the counterclockwise screw with a screwdriver, close the top shaft and remove the glass door. if you can not move the shower door, it may be a misalignment of the adjustment screw. Remove the shower door and remove other mounting accessories.
Lift the shower door so that it is not affected by the top roller. Gently pull the top roller of the raised door out and out of the door with a slender stick such as a screwdriver. When the roller leaves the sliding door, the door can be lowered (which takes a lot of effort). The door without the roller can not slide freely, lift the door again and drag the lower part out. After the door is removed, it is necessary to install it back. Instead of removing the steps, pay attention to the patience and not too hard when pulling the roller back to the iron slot at the top of the door, otherwise, it will be counterproductive.
About Himalaya Company
Himalaya was established in 2005 and located in Guangdong, specialized in shower doors, shower trays, and bathroom accessories. We understand client's needs clearly and can provide you with customized service, on-time deliveries, and stable quality products that beyond your standards. Himalaya can now launch this product at the lowest price to our customers for the last few years. We are very proud to announce this latest news to the market enables this technique to be in ordinary households. If you have any needs, you can choose our high cost-effective products.